Mazda CX-5 Manual page 230

When Driving
Instrument Cluster and Display
NOTE
Depending on the vehicle use

conditions, the wrench indicator light
may turn on for reasons other than the
preset maintenance period.
NOTE
The wrench indicator light turns on

earlier than the preset period depending
on vehicle usage conditions.
Whenever the engine oil is replaced, a

reset of the vehicle engine control unit is
necessary.
Your Authorised Mazda Repairer will be
able to reset the engine control unit or
see page 6-27 for the Vehicle engine
control unit reset procedure.
4-72
*Some models.
▼ Glow Indicator Light
(SKYACTIV-D 2.2)
When the ignition is switched ON, the
glow indicator light turns on. The glow
indicator light turns off when preheating is
finished.
A problem in the system might be
indicated under the following conditions.
Have your vehicle inspected by an expert
repairer, we recommend an Authorised
Mazda Repairer.
The glow indicator light does not turn

on when the ignition is switched ON or
it remains on.
The glow indicator light is flashing.

NOTE
If the vehicle is left with the ignition
switched ON without starting the engine
and a long period of time has elapsed
since preheating finished, the preheating
may be performed again and the glow
indicator light may turn on.
*