Mazda CX-5 Manual page 171

3. If the selector lever is in the N or P
position, the engine does not restart
when the brake pedal is released. The
engine restarts when the brake pedal is
depressed again or the selector lever is
shifted to the D, M (not in second gear
fixed mode) or the R position. (For the
purposes of safety, always keep the
brake pedal depressed when shifting
the selector lever while engine idling is
stopped.)
(When the vehicle is stopped by the
Mazda Radar Cruise Control with Stop
& Go function (MRCC with Stop & Go
function) stop hold control)
1. When the vehicle is stopped by the
Mazda Radar Cruise Control with Stop
& Go function (MRCC with Stop &
Go function), engine idling stops and
continues to be stopped without
depressing the brake pedal.
2. When the accelerator pedal is
depressed or the RES switch is
operated while the vehicle is kept
stopped by the Mazda Radar Cruise
Control with Stop & Go function
(MRCC with Stop & Go function), the
engine automatically restarts. The
engine restarts automatically when the
accelerator pedal is depressed with the
selector lever in the D/M position (not
in second gear fixed mode).
(When the vehicle is stopped by the
AUTOHOLD function)
1. When the brake pedal is depressed
while the vehicle is being driven
(except for driving in the R or M
position second gear fixed mode) and
the vehicle is brought to a stop, the
i-stop function will operate and it
continues to operate even if the brake
is released.
Start/Stop Engine
2. The engine restarts automatically when
the accelerator pedal is depressed with
the selector lever in the D/M position
(not in second gear fixed mode).
3. If the selector lever is in the N or P
position, the engine does not restart
when the brake pedal is released. The
engine restarts when the brake pedal is
depressed again or the selector lever is
shifted to the D, M (not in second gear
fixed mode) or the R position. (For the
purposes of safety, always keep the
brake pedal depressed when shifting
the selector lever while engine idling is
stopped.)
Operation conditions
When the system is operable
Under the following conditions, engine
idling stops and the i-stop indicator light
(green) turns on.
(SKYACTIV-G 2.0, SKYACTIV-G

2.5, SKYACTIV-G 2.5T)
The engine is warmed up.
(SKYACTIV-D 2.2)

The engine is not cold.

The engine has been started and the

vehicle is driven for a certain period.
The engine is started with the bonnet

closed.
The battery is in good condition.

All doors, liftgate, and bonnet are

closed.
The driver's seat belt is fastened.

The air conditioner is not operating with

the airflow mode in the
When Driving
position.
4-13