Mazda CX-5 Manual page 363

▼ Activation/Deactivation
NOTE
When the ignition is switched off, the
system status before it was turned off is
maintained.
For example, if the ignition is switched off
while the ASL is operating, the system will
be operable when the ignition is switched
ON the next time.
Activation
Press the MODE switch to operate the
system. The ASL screen is displayed, and
the ASL main indication displays in white.
NOTE
When the cruise control, Mazda Radar
Cruise Control (MRCC), or Mazda Radar
Cruise Control with Stop & Go function
(MRCC with Stop & Go function) system
becomes operable after pressing the
MODE switch, press the mode switch
again to switch to the ASL.
Deactivation
To deactivate the system, do the following
operations:
When a cruising speed has been set
(ASL set indication displays in green)
Long-press theOFF/CANCEL switch or
press the OFF/CANCEL switch 2 times.
The ASL screen is no longer displayed
and the ASL set indication (green) does
not display.
When a cruising speed has not been set
(ASL main indication displays in white)
Press the OFF/CANCEL switch. The ASL
screen is no longer displayed and the ASL
main indication (white) does not display.
i-ACTIVSENSE
NOTE
When the MODE switch is pressed while
the ASL is operating, the system switches
to the cruise control, Mazda Radar Cruise
Control (MRCC), or Mazda Radar Cruise
Control with Stop & Go function (MRCC
with Stop & Go function) system.
▼ Setting the System
WARNING
Always verify the safety of the surrounding
area when setting the ASL:
If the speed is set lower than the current
vehicle speed, the vehicle speed is
decreased to the set speed. Verify the safety
of the surrounding area and keep a safer
distance between vehicles ahead and
behind you.
1. Press the MODE switch to turn the
system on.
2. (With cruise control)
Press the SET/ to set the speed.
When the current vehicle speed is 30
km/h (20 mph) or more, the speed is
set to the current vehicle speed. When
the current vehicle speed is less than
30 km/h (20 mph), the speed is set to
30 km/h (20 mph).
(With Mazda Radar Cruise Control
(MRCC) or Mazda Radar Cruise
Control with Stop & Go function
(MRCC with Stop & Go function))
Press the SET or SET to set the
speed. When the current vehicle speed
is 30 km/h (20 mph) or more, the
speed is set to the current vehicle
speed. When the current vehicle speed
is less than 30 km/h (20 mph), the
speed is set to 30 km/h (20 mph).
When Driving
4-205