Mazda CX-5 Manual page 102

Before Driving
Doors and Locks
To unlock
To unlock the doors and the liftgate, press
the request switch on a front door and the
hazard warning lights will flash twice.
(Except European models)
A beep sound will be heard twice.
NOTE
Confirm that all doors and the liftgate

are securely locked.
For the liftgate, move it without pressing
the electric liftgate opener to verify that
the liftgate has not been left ajar.
(European models)

All doors and the liftgate cannot be
locked when any door is open.
(Except European models)
All doors and the liftgate cannot be
locked when any door or the liftgate is
open.
It may require a few seconds for the

doors to unlock after the request switch
is pressed.
(European models)

The setting can be changed so that a
beep sound is heard for confirmation
when the doors and the liftgate are
locked/unlocked using a request switch.
(Except European models)
A beep sound is heard for confirmation
when the doors and the liftgate are
locked/unlocked using the request
switch. If you prefer, the beep sound can
be turned off.
The volume of the beep sound can also
be changed. Refer to Personalisation
Features on page 9-13.
Use the following procedure to change
the setting.
1. Switch the ignition off and close all
of the doors and the liftgate.
3-12
2. Open the driver's door.
3. Within 30 seconds of opening the
driver's door, press and hold the
LOCK button on the key for 5
seconds or longer.
The beep sound activates at the
currently set volume. The setting
changes each time the LOCK button
on the key is pressed and the beep
sound activates at the set volume. (If
the beep sound has been set to not
activate, it will not activate.)
4. The setting change is completed by
doing any one of the following:
Switching the ignition to ACC or

ON.
Closing the driver's door.

Opening the liftgate.

Not operating the key for ten

seconds.
Pressing any button except the

LOCK button on the key.
Pressing a request switch.

(With theft-deterrent system)

The hazard warning lights flash when
the theft-deterrent system is armed or
turned off.
Refer to Theft-Deterrent System on page
3-48.
(With double locking system)

The double locking system can be
activated/deactivated using the request
switch.
Refer to Double Locking System on page
3-16.
The setting can be changed so that the

doors and the liftgate are locked
automatically without pressing the
request switch.
Refer to Personalisation Features on
page 9-13.