Mechanical Installation; Important Notes - Siemens SINAMICS S120 Equipment Manual

Mechanical installation

3.1

Important notes

Transport
Please note the following when transporting the cabinet units:
• The cabinet units are heavy. Their center of gravity is displaced, and they can be top
• Ensure that the ground at the installation location is strong enough to bear the weight of
• Suitable hoisting gear operated by trained personnel is also required due to the weight
• The cabinet units must always be transported in the upright position indicated. The
Serious injury or even death and substantial material damage can occur if the cabinet units
are not lifted or transported properly.
Note
Notes on transportation:
• The cabinet units are packaged by the manufacturer in accordance with the climatic
• The notes on the packaging relating to transportation, storage, and proper handling must
• The cabinet units must be carried on a wooden pallet when transported with fork-lift
• NOTICE:
• If required, cabinet units can be delivered in transport units. When a crane is used to
• Permissible ambient temperatures during transport:
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A
WARNING
heavy.
the cabinet units.
of the cabinet units.
cabinet units must not be tipped and transported in a horizontal position.
conditions and stresses encountered during transit and in the recipient country.
be observed.
trucks.
Cabinet units must not be disassembled while still on wooden pallets and awaiting
transport.
move the cabinet units, a crane transport assembly is provided for the transport unit.
-25 °C to +70 °C, class 2K3 to IEC 60721-3-2
Down to -40 °C for a maximum of 24 hours
3
33