Siemens SINAMICS S120 Equipment Manual page 158

Cabinet Modules
5.4 Active Line Modules
Order no.
Weight (standard version)
Frame size
The base load current I
1)
The power required for the 400 V AC auxiliary supply is provided by the supply input voltage.
2)
The specified power loss equals the maximum value at 100 % capacity utilization. The value in normal operation is
3)
lower.
Total sound pressure level of Active Interface Module and Active Line Module.
4)
Total of all motor cables and DC link. Longer cable lengths for specific configurations are available on request, see
5)
SINAMICS - Low-Voltage Engineering Manual on the enclosed CD-ROM.
The cabinet height increases by 250 mm with IP21 degree of protection, and by 400 mm with IP23, IP43 and IP54
6)
degrees of protection.
158
is based on a duty cycle of 150 % for 60 s or I
H DC
6SL3730- 7TE32-
1BA0
kg 380
FX + FI
max DC
7TE32- 7TE33-
6BA0 8BA0
380 530
FX + FI GX + GI
for 5 s with a duty cycle duration of 300 s.
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A
7TE35-
0BA0
530
GX + GI