Installation Device For Power Blocks - Siemens SINAMICS S120 Equipment Manual

6.4.3

Installation device for power blocks

Installation device
The installation device is used for installing and removing the power blocks for the Basic Line
Modules, Active Line Modules, Smart Line Modules, and Motor Modules in chassis format.
It is used as a mounting aid and is placed in front of and secured to the module. The
telescopic rails allow the withdrawable device to be adjusted according to the height at which
the power blocks are installed. Once the mechanical and electrical connections have been
undone, the power block can be removed from the module, whereby the power block is
guided and supported by the guide rails on the withdrawable devices.
Figure 6-1
Order number for the installation device
The order number for the installation device is 6SL3766-1FA00-0AA0.
S120 Cabinet Modules Equipment Manual
Manual, (GH5), 10/2008, A5E00427098A
Mounting aid
Maintenance and servicing
6.4 Replacing components
237