Continuous Controller Parameters; Destination - Kurzweil SPS4-8 Musician's Manual

Edit Setup Mode
The Zone-specific Parameters

Continuous Controller Parameters

The SPS4 has seven continuous controllers:
• Mod Slider
• Control Knob Function 1
• Control Knob Function 2
• Control Knob Function 3
• Control Knob Function 4
• Control Knob Function 5
• The CC Pedal
In Edit Setup mode, each of these controllers has the same three parameters:

Destination

The Destination parameter determines the MIDI destination for the currently selected
controller in the currently selected Zone. You can select from the following destinations:
8-10
Controller Destination
Number Name
0 OFF/Bank
1 MWheel
2 Breath
3 MIDI 03
4 Foot
5 PortTim
6 Data
7 Volume
8 Balance
9 MIDI 09
10 Pan
11 Express
12 MIDI 12
13 MIDI 13
14 MIDI 14
15 MIDI 15
16 Ctl A
17 Ctl B
18 Ctl C
19 Ctl D
Description
By default, when you enter 0 or Clear for the Destination
parameter, the destination will be assigned to OFF. To select
Bank as the destination, use the Value buttons.
Default assignment for Mod Wheel
Default assignment for breath controller in compatible synths
MIDI Controller 3
Default assignment for continuous foot controller in compatible
synths
Monophonic SPS4 programs respond to this Controller if
portamento is turned on.
Almost all SPS4 programs have this Controller assigned to
filter frequency or brightness.
MIDI Volume
MIDI Balance
MIDI Controller 9
MIDI Pan
MIDI Expression—Default assignment for CC Pedal 1—In
most programs it acts as a volume control. It scales between 0
and the current value of Volume.
MIDI Controller 12
Default destination for Control Knob Function 1 (Timbre)
Default destination for Control Knob Function 2 (Mod)
Default destination for Control Knob Function 3 (Envelope)
Default destination for Control Knob Function 4 (Effect)
Default destination for Control Knob Function 5 (Reverb)