File Utilities - Kurzweil SPS4-8 Musician's Manual

System Mode

File Utilities

To clear all user objects and restore the factory default state, select the System Reset utility
using the Chan / Param buttons, and then press the Next Value button. The SPS4 will ask
you to confirm this action. Press the Next Value button to complete the system reset, or
press the Previous Value button to stop the operation.
Remember to save your work off to external storage using Global Mode (See The "Save All?"
Dialogue on page 9-7). Once deleted, the files are completely removed from the SPS4 and
there is no way to retrieve them.
File Utilities
CAUTION: THIS OPERATION ERASES THE OPERATING SYSTEM, ALL
FACTORY OBJECTS AND ALL USER OBJECTS.
File Utilities has only one operation: Format. Performing this operation will format the
SPS4's system flash memory and erase the OS software as well as all Objects. Do not do
this unless you think it is necessary in order to improve the performance of your SPS4.
Should you decide to do so, be sure to back up all of your files and software. After you do
this, System Mode will still be available, so you can run updates and get your SPS4 up-and-
running again. After a Format the unit will come up in System Mode by default.
To perform a Format, follow these steps:
1. Start off by entering System Mode as specified on page 10-1.
2. Press Chan / Param Up once. This will take you to the previous option which is "File
Utilities". Press Next to select this operation. The unit display the message "Delete
All?".
3. Press Next to perform the Format operation.
10-4