The Cc Pedal Jack; The Usb Port; The Audio Out (Left/Mono And Right) Jacks; The Audio In Jacks - Kurzweil SPS4-8 Musician's Manual

The jack will also accept a dual switch pedal having a single stereo plug that is available
separately (Kurzweil KFP-2S). For more information on connecting pedals, see Connecting
Pedals on page 2-6.

The CC PEDAL Jack

Use the CC PEDAL jack to connect a continuous control (or CC) pedal. A CC pedal is a
physical controller typically used to control multi-state (i.e., "continuous") parameters such
as filter frequency or LFO amount. Note that CC pedals can be used to control "on / off "
parameters as well.
For more information on connecting pedals, see Connecting Pedals on page 2-6 below.

The USB Port

Use the USB port to connect the SPS4 to a computer in order to do the following:
• Use the SPS4 as a MIDI controller with a sequencer computer program.
• Use the computer to manage the user data contents of the SPS4.
• Update the software and sounds of the SPS4.
Be sure to check the Kurzweil Music Systems website at www.Kurzweil.com for new
documentation and software updates before using your new instrument.

The Audio Out (LEFT/MONO and RIGHT) Jacks

Use the LEFT/MONO and RIGHT audio jacks to connect the SPS4 to an external
amplifier or mixer.

The Audio In Jacks

Use the LEFT and RIGHT Audio Input jacks to connect a CD or MP3 player or the audio
from a second keyboard to the sound system of your SPS4. These are "TRS" balanced
inputs. Using 1/4" balanced (stereo) cables will usually lessen extraneous noises such as
power line hum.

The DC Power Jack

Use the DC power jack to connect the DC power supply.

The HEADPHONES Jack (left cheekblock)

Use the HEADPHONES jack to listen to the SPS4 on stereo headphones. You will need a
1/4-inch-to-1/8-inch adapter in order to use headphones with a mini plug.
Getting Started
Start Up Details:The Rear Panel
2-3