Storage; Shipping; Specifications; General Specifications - Fluke IDA-5 Getting Started

Infusion device analyzer
Hide thumbs Also See for IDA-5:
Table of Contents

Advertisement

IDA-5
Getting Started

Storage

Remove all water from the Product before storage,
particularly if temperatures can fall below 5 °C (41 °F). Do
not pressurize the inlet ports. It is safest to use a medical
suction pump to drain the measuring channels and use
the Cycle Valves from the Calibration menu (follow on-
screen instructions).

Shipping

Remove all liquid from the Product before shipping. To
prevent liquid from entering the ports, put the Product in a
large plastic bag. Put the bagged Product into its shipping
carton. If this is not available, make sure there is shock
protection with a minimum of 5 cm compressible
cushioning inside the carton (e.g. 60 cms x 60 cms x
60 cms).
12

Specifications

General Specifications

Operating Voltage
Range ............................ 100 to 240 V ac
Supply Frequency.......... 50/60 Hz
Supply Power ................ <50 VA
Fuses ............................. 20 mm T1.6 A H 250 V x 2
Size ............................... 30 H x 20 W x 20 D (cm) 12 x
Weight ........................... 5 kg (approx) (11 lbs.)
Altitude .......................... 0 to 3000 m (10000 ft)
Temperature
Operating ....................... 15 °C to 30 °C (59 °F to
Storage .......................... -20 °C to +40 °C (-4 °F to
Humidity ........................ 10 % to 90 % non-
8 x 8 (in.)
86 °F)
+104 °F) when drained of all
liquid
condensing

Advertisement

Table of Contents
loading

Table of Contents