Table of Contents
Advertisement
Introduction
The Fluke Biomedical IDA-5 Infusion Device Analyzer
(the Product) is a precision instrument that examines the
performance of medical infusion devices. The Product
measures the flow rate and volume supplied, and the
pressure generated in occlusion or blockages of the fluid
line. A maximum of 4 infusion devices can be
independently examined with the four-channel version of
the Product.
Intended Use
The Product is to be used by infusion device
manufacturers, hospital biomedical engineering
departments, and third-party service organizations. Use
the Product to verify accurate performance of infusion
devices through measurement of flow, volume, and
pressure. The performance of a wide range of infusion
devices can be analyzed including syringe, drop counting,
peristaltic, and volumetric types. Non-steady flow rate
pumps can also be analyzed. The Product uses distilled
or deionized water with an optional wetting agent only.
Safety Information
A Warning identifies hazardous conditions and actions
that could cause bodily harm or death. A Caution
identifies conditions and actions that could harm the
Product, the equipment under test, or cause permanent
loss of data.
Warning
To prevent possible electrical shock, fire, or
personal injury:
•
Read all safety Information before you
use the Product.
•
Carefully read all instructions.
•
Use the product only as specified, or the
protection supplied by the product can
be compromised.
•
Do not use the Product if it operates
incorrectly.
1
Advertisement
Table of Contents
