Replace Pto Belt - Gravely Compact-Pro 34 Operator's Manual

Replace Relay
NOTICE: Relays are interchangeable. Use
only quality replacement parts. See Service
Parts on page 17.
1. Place unit in service position. See
Service Position on page 16.
2. Remove defective relay.
3. Determine cause of relay failure and
repair condition.
4. Install new relay.
Figure 29

REPLACE PTO BELT

CAUTION: Damage or worn
belts may result in injury and / or
damage to the unit. Check belts
for excessive wear or cracks of-
ten.
1. Place unit in service position. See
Service Position on page 16.
2. Position mower deck at lowest cutting
height.
See Figure 30.
3. Loosen wing knobs securing belt covers
to deck and remove belt covers.
4. Lift foot plate to access deck center.
Remove PTO Belt
CAUTION: Use care when
releasing idler spring tension.
Keep body parts away from
idlers when performing this
operation.
See Figure 31.
1. Slowly remove spring hook from anchor
bolt to release tension from belt idler.
2. Remove PTO belt.
4
3
1. Spring
2. Anchor Bolt
3. PTO Belt
4. PTO Belt Idler
EN - 25
Figure 30
1
Figure 31
2