Led Display - Graco 1095 Operation, Parts
Electric airless sprayers, for professional use only, not approved for use in explosive atmospheres or hazardous locations, for portable airless spraying of architectural paints and coatings, 3300 psi 228 bar, 22.8 mpa maximum working pressure
Hide thumbs
Also See for 1095:
- Operation manual (21 pages) ,
- Operation, parts (88 pages) ,
- Parts manual (19 pages)
Table of Contents
Advertisement
LED Display
LED Display
(not included on all models)
Operation Main Menu
Short press DISPLAY button to move to
next display. Press and hold to change
units or reset data.
1.
Perform the Pressure Relief
Procedure, page 19.
2.
Turn power ON. LED Display will show
dashes if pressure is less than 200 psi
(14 bar, 1,4 MPa).
32
Change Display Units
Press and hold the DISPLAY button for
5 seconds to change pressure units
(psi, bar, MPa) to desired units.
Selection of bar or MPa changes
gallons to liters x 10. To change
display units LED Display must be in
pressure display mode and pressure
must be at zero (dashes displayed).
3A6342A
Hide quick links:
Advertisement
Table of Contents
