Refilling Paint Pail - Graco 1095 Operation, Parts
Electric airless sprayers, for professional use only, not approved for use in explosive atmospheres or hazardous locations, for portable airless spraying of architectural paints and coatings, 3300 psi 228 bar, 22.8 mpa maximum working pressure
Hide thumbs
Also See for 1095:
- Operation manual (21 pages) ,
- Operation, parts (88 pages) ,
- Parts manual (19 pages)
Table of Contents
Advertisement
5.
Transfer Drain Tube to paint pail.
6.
Install Spray Tip Guard. Rotate Spray
Tip back to SPRAY position and ensure
the Spray Tip Guard is tight.
You are now ready to spray!
NOTE: It is normal for the motor to stop once
the sprayer is primed and under pressure.
Refilling Paint Pail
When the paint pail runs low and the Spray
Gun stops spraying, refill the paint pail and
repeat the Fill Pump (Prime Pump)
procedure, then the Fill Spray Gun and
Hose procedure.
3A6342A
Start Up
23
Hide quick links:
Advertisement
Table of Contents
