Graco 1095 Operation, Parts page 9

FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To
help prevent fire and explosion:
•
Do not spray flammable or combustible materials near an open flame or sources of ignition
such as cigarettes, motors, and electrical equipment.
•
Paint or solvent flowing through the equipment is able to result in static electricity. Static
electricity creates a risk of fire or explosion in the presence of paint or solvent fumes. All
parts of the spray system, including the pump, Hose assembly, Spray Gun, and objects
in and around the spray area shall be properly grounded to protect against static discharge
and sparks. Use Graco conductive or grounded high-pressure airless paint sprayer
hoses.
•
Verify that all containers and collection systems are grounded to prevent static discharge.
Do not use pail liners unless they are anti-static or conductive.
•
Connect to a grounded outlet and use grounded extensions cords. Do not use a 3-to-2
adapter.
•
Do not use a paint or a solvent containing halogenated hydrocarbons.
•
Do not spray flammable or combustible liquids in a confined area.
•
Keep spray area well-ventilated. Keep a good supply of fresh air moving through the area.
•
Sprayer generates sparks. Keep pump assembly in a well ventilated area a least 20 feet
(6.1 m) from the spray area when spraying, flushing, cleaning, or servicing. Do not spray
pump assembly.
•
Do not smoke in the spray area or spray where sparks or flame is present.
•
Do not operate light switches, engines, or similar spark producing products in the spray
area.
•
Keep area clean and free of paint or solvent containers, rags, and other flammable
materials.
•
Know the contents of the paints and solvents being sprayed. Read all Safety Data Sheets
(SDSs) and container labels provided with the paints and solvents. Follow the paint and
solvents manufacturer's safety instructions.
•
Keep a working fire extinguisher in the work area.
ELECTRIC SHOCK HAZARD
This equipment must be
cause electric shock.
•
Turn off and disconnect power cord before servicing equipment.
•
Connect only to grounded electrical outlets.
•
Use only 3-wire extension cords.
•
Ensure ground prongs are intact on power and extension cords.
•
Do not expose to rain. Store indoors.
•
Wait five minutes after disconnecting power cord before servicing.
3A6342A
grounded. Improper grounding, setup, or usage of the system can
Warnings
9