User Interfaces; Graphical User Interface (Gui) - KaVo ORTHOPANTOMOGRAPH OP 3D Service Manual

4 Device description

4.4 User Interfaces

4.4.1 Graphical User Interface (GUI)

GUI Overview
1. Selected patient name and Patient Identification (ID).
2. Selection of imaging modality, PAN or 3D.
3. Imaging program settings.
4. Main view area. Shows a dental chart for the selected modality and previews of the
taken images.
5. Status message bar shows the device status and provides messages and instructions
to the user. Click on the bar to show messages if there are more than the ones
shown.
6. Imaging parameters. Imaging parameters, kV (PAN only) and mA, can be manually
adjusted according to the patient size and skull anatomy using the - & + icons.
7. Sample image of the selected Panoramic program or 3D FOV size and location
illustration.
8. Scan time and DAP display. Shows the duration of X-ray radiation and the dose
production with the selected imaging program and parameters.
9. Device settings. Opens a menu which is used to access the device settings, quality
control and calibration programs and to show the device information, like serial
number and software versions.
22 ORTHOPANTOMOGRAPH
™
OP 3D