Replacing The I4100 Back Panel Board - KaVo ORTHOPANTOMOGRAPH OP 3D Service Manual

8 Part replacement instructions
1. Disconnect the cable.
2. Turn the flaps of the i8000 LED indicator board slightly to remove the board and its
cover from the carriage.
3. Put the new board and cover to its place.
NOTICE! Be careful not to damage the new board. Do not use excessive
force.
4. Connect the cable.

8.3.18 Replacing the i4100 back panel board

Required tools: screwdriver
1. Detach the back panel plate by removing the two indicated screws.
2. Detach the connector.
148 ORTHOPANTOMOGRAPH
™
OP 3D