Installation Guidelines; Safety Information - Siemens LDS 6 Operating Instructions Manual

Installation Guidelines

3.1

Safety Information

It is essential that you observe the given information and warnings!
Electrical Safety
Certain parts inside the gas analyzer LDS 6 carry dangerous voltages.
The housing must be closed and grounded before switching on the analyzer.
Death, personal injury and/or damage to persons and/or property may result if this is not
observed.
LDS 6 and CD 6 meet all regulations specified in the present EU regulations
(LVD regulation 2006/95/EC and EMC regulation 2004/108/EC).
The device can be used in an industrial environment.
Laser Safety
All lasers used by LDS 6 are of class 1. The emitted laser light is in most cases invisible
(near infrared) and the intensity is low enough so that the unprotected eye is not damaged
under normal circumstances. LDS 6 has warning labels at appropriate positions according to
DIN EN 60825-1.
This device emits laser beams.
To avoid damage to your eyes never look directly into the laser beam.
If this rule is not followed there is a chance that damage to the unprotected eye may occur
if you look directly into the laser beam particularly when using focusing optics (e. g.
binoculars).
LDS 6
Operating Instructions, 01/2009, A5E00295894-05
DANGER
CAUTION
3
25