Slist; Column - HP 16554A Programmer's Manual

SLISt

Selector :MACHine{1|2}:SLISt
The SLISt selector is used as part of a compound header to access those
settings normally found in the State Listing menu. It always follows the
MACHine selector because it selects a branch directly below the MACHine
level in the command tree.
Example
OUTPUT XXX;":MACHINE1:SLIST:LINE 256"

COLumn

Command :MACHine{1|2}:SLISt:COLumn <col_num>
[,<module_num>,MACHine{1|2}],<label_name>,<base>
The COLumn command allows you to configure the state analyzer listing by
assigning a label name and base to one of the 61 vertical columns in the
menu. A column number of 1 refers to the leftmost column. When a label is
assigned to a column it replaces the original label in that column.
When the label name is "TAGS," the TAGS column is assumed and the next
parameter must specify RELative or ABSolute.
integer from 1 to 61
<col_num>
<module_num> {1|2|3|4|5|6|7|8|9|10}
a string of up to 6 alphanumeric characters; "TAGS" to insert state or time
<label_name>
tags.
<base> {BINary|HEXadecimal|OCTal|DECimal|TWOS|ASCii|SYMBol|
IASSembler} for labels or
{ABSolute|RELative} for tags
Example
OUTPUT XXX;":MACHINE1:SLIST:COLUMN 4,'ADDR',HEX"
SLISt Subsystem
SLISt
7–7