Symbol; Base - HP 16554A Programmer's Manual

SYMBol

Selector :MACHine{1|2}:SYMBol
The SYMBol selector is used as a part of a compound header to access the
commands used to create symbols. It always follows the MACHine selector
because it selects a branch directly below the MACHine level in the command
tree.
Example
OUTPUT XXX;":MACHINE1:SYMBOL:BASE 'DATA', BINARY"

BASE

Command :MACHine{1|2}:SYMBol:BASE <label_name>,
<base_value>
The BASE command sets the base in which symbols for the specified label
will be displayed in the symbol menu. It also specifies the base in which the
symbol offsets are displayed when symbols are used.
BINary is not available for labels with more than 20 bits assigned. In this case
the base will default to HEXadecimal.
string of up to 6 alphanumeric characters
<label_name>
<base_value> {BINary | HEXadecimal | OCTal | DECimal | ASCii}
Example
OUTPUT XXX;":MACHINE1:SYMBOL:BASE 'DATA',HEXADECIMAL"
SYMBol Subsystem
SYMBol
15–5