Fcc Information For The Usa - Siemens MOBY series User Manual

R 01.04
The appropriate charging device (including 230 V plug-in power pack) for re-
charging the batteries must be ordered separately.
S MOBY D/E/F/I
The charging device (order number 6GT2 303-1DA00) is designed for
mounting on walls or vehicles. When mounted on a vehicle, a special
PSION cable is required for the charging function. See appendix A.1.
S MOBY U
The batteries of the hand-held terminal (in PSION Workabout and the an-
tenna) are charged with the power pack (order number 6GT2 503-1DA00).
See chap. 3.4.
For applications, a C library is available to the user with the functions of the
MOBY read head. Users can develop their own programs (cf. appendix A.2)
with the optional C development environment.
1.3

FCC Information for the USA

S PSION basic device – See PSION user's manual.
S MOBY E/I/U read head/antenna
Made in Germany
SIEMENS MOBY STG
FCC ID: KR5MIS
KR5MIS-I
NXWMOBYU-STGU
THIS DEVICE COMPLIES WITH PART 15 OF THE
FCC RULES: OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
Note
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment:
Such modifications could void the user's authority to operate the
equipment.
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.1-7418
General
(for MOBY E)
(for MOBY I)
(for MOBY U)
E-3