Charging Function - Siemens MOBY series User Manual

R 01.04 Using the STG
3.4

Charging Function

The battery charging procedure is started as soon as the PSION Workabout is
placed in the wall or vehicle holder. Charging is activated and indicated with a
green LED. See chapter 3.1.
When the batteries are empty, at least 14 hours are required for a complete
charge.
High-speed battery charging
The batteries supplied by Siemens for the PSION Workabout can be charged at
high speed so that the MOBY hand-held terminal can be operated directly in
the high-speed charging device available from PSION. A full charge takes
1 hour.
Use of other batteries
Other AA batteries can also be used in the PSION Workabout. These include
rechargeable NiCd batteries and alkali batteries which cannot be recharged.
IMPORTANT: Be sure to adhere to the PSION user's manual.
The backup battery
The backup battery in the PSION Workabout is used to retain the application
data when the main batteries are empty. The backup battery is a lithium cell
which cannot be charged. Remember that, when the main batteries are empty
or have been removed, a new backup battery can only maintain the data in the
RAM for just a few days.
STG Hand-Held Terminal
E-13
(5)J31069-D0126-U001-A5.1-7418