File Functions; Loading A File; Saving; Exiting - Siemens MOBY series User Manual

R 01.04
4.3

File Functions

4.3.1

Loading a File

A file can be loaded to the STG editor which was
S saved before with the "file/save" command or
S transferred from the PC to the "RAMDRIVE (M:)" drive of the PSION. See
chapter 6.2.
4.3.2

Saving

Data currently being displayed by the editor can be saved in a file on the
PSION. The file name may consist of 1 to 8 letters or numbers. During the
storage procedure, the extension ".HEX" (data) and ".HX1" (ID no.) is
automatically added to the file name. See also chapter 6.2.
A memory area of approximately 1.8 Mbytes is available on the hand-held
terminal for storage of MDS data (i.e., with MOBY E, up to 2000 MDSs can be
read and stored).
4.3.3

Exiting

The "exit" function can be used to conclude the STG program of MOBY. This
gives you access to the operating system levels of the PSION hand-held
terminal. See chapter 6.3.
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.1-7418
The "MOBY D/E/F/I/U" Programs
E-27