Automatic Power Saver Function; Connecting Sim Devices (Moby E/I/V; Program - Siemens MOBY series User Manual

Expanded Functions
This procedure can be used to start applications and PSION operating pro-
grams in addition to the normal MOBY application. All programs run simulta-
neously on the hand-held terminal.
6.5

Automatic Power Saver Function

The PSION hand-held terminal has an automatic power saver function. This is
activated after no keys have been pressed on the PSION for approximately
5 minutes.
In addition, the "MOBY D/E/F/I/U" programs have another power saver function.
The MDS command being executed is interrupted if no MDS is detected 30
seconds after the start of an MDS command or the MDS being processed is
moved out of the field for more than 30 seconds. The following message ap-
pears.
6.6

Connecting SIM Devices (MOBY E/I/V)

A MOBY E SIM can be connected to the RS 232 interface of the PSION. The
following figure shows the connection diagram. Before commissioning, a
switch must be made to MOBY E/SIM or ASM 420/I/V with the "EXTRAS/COM-
MUNICATION/PROTOCOL" function.
With this configuration, SIM can be used to work with the "MOBY" program and
user applications with the MOBY library. Cf. appendix A.2.
MOBY E/SIM:
E-58
You can now completely terminate the command
with ESC or continue with ENTER. If you decide
to continue, the interrupted command is contin-
ued at the point at which it was interrupted.
Cable (6GT2 391-1DH50)
and
Power pack (6GT2 090-0HB00)
220 V AC
24 V DC
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.1-7418
R 01.04