J31069-D0126-U001-A5 - Siemens MOBY series User Manual

Expanded Functions
How to enable port C:
If you made wrong entries during this procedure and are unable to continue,
perform a system RESET as described in chapter 6.7.
If the message "keine Verbindung" (i.e., no connection) continues to appear in
the PSION desktop directory of Explorer, check the 3link cable between the
hand-held terminal and the PC, and the REMOTE setting on the hand-held ter-
minal.
Open the file tree of the hand-held terminal by double-clicking the "RAMDRIVE"
drive. There you will find, among others, the "READ_D/E/F/I/U.HEX" file and
the files which you stored with the extension ".HEX." Now drag and drop or
copy these files from the PSION drive to the PC drive.
E-54
Exit the STG program with EXIT. The basic
S
PSION menu appears.
Menu key: Position the cursor on "System
S
screen," and acknowledge with "Enter." A user
interface similar to Windows appears.
Menu key: Call SPEC/REMOTE LINK. The
S
"Remote link" window appears.
Make the following settings in this window.
S
Remote link = ON, baud rate = 19200,
port = C, parameters = (don't specify anything).
Before you acknowledge with "Enter," establish
S
a connection to the PC with the 3link cable
described in chapter 6.2.1. Otherwise you will
receive the message "Device does not exist."

(5)J31069-D0126-U001-A5.1-7418

R 01.04
STG Hand-Held Terminal