Change File Size (File Size; Delete Display (Clear Display; Jump To Address; Display Setup - Siemens MOBY series User Manual

R 01.04
5.6.3

Change File Size (File Size)

The editor shows the current size of a file in the second line. This length can
be modified with the "File Size" command. When the file is made longer, an ap-
propriate number of zeros (00 Hex) is appended to the end of the file. The edi-
tor shows the appended portion with inverted digits.
5.6.4

Delete Display (Clear Display)

This function clears the memory of the editor display. The hexadecimal value
of the filler character can be specified. The standard filler character is 00hex.
After deletion, all data in the display are shown inverted to indicate that no data
have been entered yet by the user.
5.6.5

Jump to Address

Normally the cursor is positioned within a file with the four arrow keys (z, !, ",
#). With large files, it is much quicker to use the "jump to address" function to
position the cursor anywhere within the file. You can also call the "jump to ad-
dress" function very easily with the Tab key.
5.6.6

Display Setup

The display is set here. You can choose either hexadecimal or ASCII format.
In ASCII format, the characters which cannot be shown appear as white fields.
For more information, see the ASCII table in appendix A.3.
STG Hand-Held Terminal
(5)J31069-D0126-U001-A5.1-7418
The "FILEHANDLER" Program
E-49