Extended Run Time - Ultra Start 45xx Series Owner's Manual

2WAY REMOTE STARTER/ ALARM
Remote Start - Automatic Transmission
1. Press and release button #3.
2. The park lights will flash and the siren will chirp one time.
3. The vehicle will then remote start. The park lights will flash four
1 2 3
times then remain on while the vehicle is running. The run timer
4
on the LCD will begin to countdown.
4. The vehicle will continue to run for the programmed runtime*.
Never remote start if the vehicle is parked in a Garage.
Note: If the remote starter fails to start, the park lights will flash a
Remote Stop
1.Press and hold button #3 for three seconds. The remote starter
1 2 3
4
will shut down. The park lights will flash and the siren will chirp
two times to confirm shutdown.
Note: Pressing the brake pedal or opening the hood will also shut

Extended Run Time

1.Press and release button #3 while the vehicle is running.
1 2 3
2.The system will respond with one park light flash and one siren
4
chirp to confirm Extended Runtime.
The system will reset the run time*.
Note: Extended runtime will not work if the runtime is programmed
Operate in a well ventilated area only.
Trouble Shooting Code. Count the number of flashes and
refer to the Diagnostics Chart on page 15.
down the remote starter.
for 4 Minutes.
OWNER'S GUIDE
*Default 15 minutes
Page 3