Se Rvice Mode - Ultra Start 660 Series Owner's Manual

Advanced 2-way remote vehicle security system
Hide thumbs Also See for 660 Series:
Table of Contents

Advertisement

OWNER'S MANUAL
PAGE 10
Emergency Ser vice Mode - (Valet Mode)
This feature will disable the system except for lock, unlock and trunk
functions. This mode is used if a remote is misplaced, damaged or if
the system malfunctions. If the system was installed with a starter
disable this feature will disable the starter disable relay and allow the
vehicle to start.
Activate/ Deactivate Service Mode (Valet Mode)
Method 1
To Activate Service Mode:
Ignition
"On"
Turn the ignition key to the "On" position then press and hold the
Program Button located on the antenna for 5 seconds. The system
will chirp the siren 5 times as confirmation.
To Deactivate Service Mode:
Turn the ignition key to the "On" position then press and hold the
5 sec.
Program Button located on the antenna for 5seconds. The system
will chirp the siren 2 times as confirmation.
Method 2
To Activate Service Mode:
Press and release the # Button and then press and hold it until the
#
system chirps the siren 5 times as confirmation.
To Deactivate Service Mode:
Press and Release the # button and then press and hold it until the
system chirps the siren 2 times as confirmation.
NOTE: The LEDs will be "ON" solid and the "?" icon on the remote
transmitter will appear when the system is in Service Mode.
REMOTE VEHICLE SECURITY

Advertisement

Table of Contents
loading

Table of Contents