System Data Logging (Optional) - Garmin CIRRUS PERSPECTIVE SR22T Reference Manual

SYSTEM DATA LOGGING (OPTIONAL)

NOTE: An account must be established with Garmin Flight Data Services to
make full use of the System Data Logging feature.
Control and monitoring of report transmissions is accomplished through the AUX-
REPORT STATUS Page.
Viewing the Report Status Page
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select REPORTS/DATA LINK.
3) If necessary, select the REPORT Softkey to display the AUX-REPORT STATUS
Page.
Changing the Transmission Method
1) While viewing the Report Status Page, press the FMS Knob to activate the
cursor.
2) Turn the large FMS Knob to move the cursor to the 1st or 2nd transmit
method for the desired data report.
3) Turn the small FMS Knob to select the desired option (SAT SHORT BURST,
SAT RUDICS, WI-FI, or NONE). Sat Short Burst is generally used for
transmission of data packets less than 300 bytes. Wi-Fi is used only when
the aircraft on the ground and the system is connected to a Wi-Fi network.
4) Press the ENT Key.
Enabling/disabling Automatic Send for Automatic Test Reports
1) While viewing the Report Status Page, press the FMS Knob to activate the
cursor.
2) Turn the large FMS Knob to move the cursor to the AUTOMATIC SEND field.
3) Turn the small FMS Knob to select ENABLED or DISABLED.
4) Press the ENT Key.
190-00821-09 Rev. A
Cirrus Perspective ™ by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
Additional Features
101