Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'NRST' airport
waypoints to the aircraft's current position.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'RECENT'
waypoints.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
e) Press the ENT Key again to "accept" the waypoint.
ENTER AN AIRWAY IN A FLIGHT PLAN
Enter airway using the Quick Select Box:
1) Press the FPL Key on the PFD/MFD Control Unit to display the active flight
plan.
2) Use the Joystick to move the Insertion Point Indicator to the desired entry
point in the flight plan list.
3) Begin entering the identifier of the airway entry waypoint using the PFD/
MFD Control Unit's alphanumeric keys. The Waypoint Information Window
is displayed as the identifier is entered.
4) Press the ENT Key. The Quick Select Box and Insertion Point Indicator are
now located following the newly entered waypoint.
5) Press the MENU Key and select "Load Airway" (required on the PFD). The
Select Airway Page is displayed. The "Load Airway" menu item is available
only when an acceptable airway entry waypoint has been entered in step 3
(the waypoint ahead of the Insertion Point Indicator).
6) Turn the FMS Knob to select the desired airway from the list, and press the
ENT Key. Low altitude airways are shown first in the list, followed by "all"
altitude airways, and then high altitude airways.
190-00821-09 Rev. A
Cirrus Perspective
™
by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
Flight Planning
45