Wi-Fi Connections (Optional) - Garmin CIRRUS PERSPECTIVE SR22T Reference Manual

a) Press the MENU Key to display the Page Menu.
b) Turn either FMS Knob to place the cursor on 'Delete Selected Message'.
c) Press the ENT Key.

WI-FI CONNECTIONS (OPTIONAL)

Control and monitoring of Wi-Fi functions are accomplished through the AUX-
WI-FI SETUP Page.
Viewing the Wi-Fi Setup Page
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select REPORTS/DATA LINK.
3) If necessary, select the WI-FI Softkey to display the AUX-WI-FI SETUP Page.
Setting Up a New Wi-Fi Connection
1) Select the AVAIL Softkey on the MFD. A list of available networks will be
displayed in the AVAILABLE NETWORKS window. Signal strength is shown
for each network, as well as security methods and whether the network has
been saved in the system's memory.
2) If necessary, select the RESCAN Softkey to have the system scan again for
available networks.
3) Press the FMS Knob to place the cursor in the list of networks.
4) Turn either FMS Knob to select the desired network.
5) Select the CONNECT Softkey.
6) If the network is secured, enter the necessary passcode. Use the FMS
Knobs to enter the desired alpha numeric characters. Select the CAP LOCK
Softkey to enter upper case letters. If there is no security associated with
the network, proceed to step 9.
7) Press the ENT Key. 'OK' will be highlighted.
8) Press the ENT Key again.
9) The SAVE SETTINGS window is now displayed with the cursor highlighting
'SAVE CONNECTION'.
10) The selected network can be saved to system memory to make reconnection
easier at a later time.
190-00821-09 Rev. A
Cirrus Perspective ™ by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
Additional Features
99