Table of Contents
Advertisement
W20000-en.book Page 34 Monday, October 22, 2007 3:35 PM
Turning the power off
To turn the projector off, press POWER (
control and a warning message appears. Press POWER again.
•
The Power indicator light flashes orange and the fans run for about
two minutes to cool the lamp. The projector will not respond to any
commands until the cooling process is complete.
•
Then, the Power indicator light is a steady orange once the cooling
process has finished and fans stop.
•
If the projector will not be used for an extended period, turn the
main power switch off and unplug the power cable from the power
outlet.
•
To protect the lamp, the projector will not respond to any
commands during the cooling process.
34
Using the projector
) on the projector or remote
Power Off
Press
again to power off.
Press any other button to cancel
Advertisement
Table of Contents
