Table of Contents
Advertisement
W20000-en.book Page 9 Monday, October 22, 2007 3:35 PM
Controls and functions
Control panel
7
9
11
13
1.
Foucs ring
Adjusts the focus of the projected image.
2.
Zoom ring
Adjusts the size of the projected image.
3.
POWER indicator light
Lights up or flashes when the projector is
operating. See
"Indicators" on page 47
4.
TEMPerature warning light
Lights up or flashes if the projector's temperature
becomes too high. See
details.
5.
LAMP indicator light
Lights up or flashes when the projector lamp has
developed a problem. See
for details.
6.
LENS SHIFT
LENS SHIFT
Performs the same action as LENS and
the remote control.
Adjusts the motorised vertical lens shift by
moving the image upwards or downwards on the
screen in relation to the orientation of the
projector. See
"Shifting the projection lens
vertically" on page 12
When the on-screen menu is activated, moves the
selection upwards or downwards.
1
2
3
4
5
6
7
6
8
10
12
for details.
"Indicators" on page 47
for
"Indicators" on page 47
(up)
(down)
/
on
for details.
7.
Keystone
/ Left-arrow
Keystone
/ Right-arrow
Manually corrects distorted pictures resulting
from an angled projection.
See
"Correcting picture distortion" on page 23
details.
When the on-screen menu is activated, moves the
selection to the left or right.
8.
MENU button
Performs the same action as MENU on the remote
control.
Toggles the On-Screen Display (OSD) menu on
and off. See
"Using the menus" on page
9.
POWER button
Performs the same action as POWER on the
remote control.
Toggles the projector between standby and on.
See
"Turning the projector on" on page 19
"Turning the power off " on page 34
10. SOURCE button
Performs the same action as the source selection
buttons (COMP1, COMP2, VIDEO, HDMI 1,
HDMI 2, RGB HD, S-VIDEO) on the remote
control.
Switches sequentially through input sources.
See
"Selecting an input source" on page 19
details.
11. PRESET MODE button
Depending upon which input source is selected,
selects an available picture setup mode. See
"Selecting a preset mode" on page 24
12. ENTER button
Enacts the selected On-Screen Display (OSD)
menu item.
13. EXIT button
Goes back to previous OSD menus, exits and saves
any changes made using the On-Screen Display
(OSD) menu. See
"Using the menus" on page 20
for details.
button
button
for
20.
and
for details.
for
for details.
9
Overview
Advertisement
Table of Contents
