Table of Contents
Advertisement
W20000-en.book Page 33 Monday, October 22, 2007 3:35 PM
Creating your own startup screen
In addition to selecting the projector preset startup screen from among BenQ logo or Blue screen, you can make
your own startup screen that is a picture projected from your computer or video source.
To create your own startup screen, project the picture you want to use as your startup screen from either a
computer or video source. The rest steps are as follows.
•
Using the OSD menu
1.
Press MENU and then press
highlighted.
2.
Press
to highlight My Screen and press ENTER. A confirmation message
displays.
3.
Press ENTER again.
4.
The message 'Screen Capturing...' displays while the projector is processing
the picture. Please wait.
5.
If the action is successful, you see the message 'Captured Succeeded' on the
screen. The captured picture is saved as My Screen.
6.
To view the captured picture displayed as the startup screen, set My Screen in the System Setup > Splash Screen
menu and restart the projector.
In the unlikely event that the capturing action fails, change your target picture.
Personalizing the projector menu display
The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do not affect the
projection settings, operation, or performance.
•
Rename User Mode: See
•
Menu Display Time in the System Setup > Menu Settings menu sets the length of time the OSD will remain active
after your last key press. The time length ranges from 5 to 30 seconds in 5-second increments. Use
suitable time.
•
Menu Position in the System Setup > Menu Settings menu sets the OSD position in five locations. Use
select a preferred position.
•
Language in the System Setup menu sets your familiar language for the On-Screen (OSD) Menus. See
menus" on page 20
•
Splash Screen in the System Setup menu sets a preferred logo screen to be displayed during projector start-up. See
"Creating your own startup screen" on page 33
Locking control keys
With the control keys on the remote control and projector locked, you can prevent your projector settings from being
changed accidentally (by children, for example). When Key Lock is on, no control keys on the remote control and
projector will operate except POWER and EXIT.
To lock the keys:
•
Using the OSD menu
1.
Press MENU and then press
highlighted.
2.
Press
to highlight Key Lock, and press ENTER. The control keys lock.
To unlock the keys, press and hold EXIT on the projector or remote control for 5
seconds.
/
until the System Setup menu is
"Renaming user modes" on page 25
for details.
for details.
/
until the Advanced Setup menu is
System Setup
Language
Splash Screen
My Screen
Projector Position
Auto Off
Sleep Timer
Background Color
Menu Settings
Input Source
Auto Source Search
S-Video
for details.
Advanced Setup
Lamp
Pattern
Dust Filter
High Altitude Mode
Password
Key Lock
Reset All Settings
ISF
S-Video
Using the projector
English
My Screen
ENTER
Floor Front
Disable
Disable
Blue
On
EXIT Back
/
to select a
/
to
"Using the
Off
ENTER
EXIT Back
33
Advertisement
Table of Contents
