Table of Contents
Advertisement
W20000-en.book Page 16 Monday, October 22, 2007 3:35 PM
Connecting with video equipment
You can connect the projector to any type of video equipment, such as a VCR, DVD player, digital tuner, cable or
satellite decoder, video game console or digital camera. You can also connect it to a desktop or laptop PC or
Apple Macintosh system. However, it has no built-in speakers and cannot be connected to audio equipment.
The projector can be connected to multiple video equipment at the same time by using different cables. All you
need to do is select the appropriate input for the projector to display.
Best video quality
The best available video connection method is HDMI. HDMI (High-Definition Multimedia Interface) supports
uncompressed video data transmission between compatible devices like DTV tuners, DVD players and displays
over a single cable. It provides pure digital viewing and listening experience.
See
"Connecting HDMI devices" on page 17
The RGBHV also provides high video quality that transmits Red, Green, Blue, Horizontal and Vertical sync
signals separately on its own conductor.
See
"Connecting RGBHV devices" on page 17
The next best video signal is Component Video (not to be confused with composite Video). Digital TV tuner and
DVD players output Component Video natively, so if available on your devices, this should be your connection
method of choice in preference to (composite) Video.
See
"Connecting component-video devices" on page 17
device.
Better video quality
The S-Video method provides a better quality analog video than standard composite Video. If you have both
composite Video and S-Video output terminals on your Video source device, you should elect to use the S-Video
option.
Least video quality
Composite Video is an analog video and will result in a perfectly acceptable, but less than optimal result from
your projector, being the least video quality of the available methods described here.
See
"Connecting S-Video or video devices" on page 18
composite Video device.
Preparations
When connecting a signal source to the projector, be sure to:
1.
Turn off all equipment before making any connections.
2.
Use only the correct type cables for each source with proper type plugs.
3.
Ensure that all cable plugs are firmly fitted to the equipment sockets.
Note that all cables shown in the following connection diagrams may not be supplied with the projector
(See
"Shipping contents" on page 6
stores.
16
Connecting with video equipment
for how to connect the projector to a HDMI device.
for how to connect the projector to a RGBHV device.
for how to connect the projector to a component video
for how to connect the projector to an S-Video or
for details). Most cables are commercially available from electronics
Advertisement
Table of Contents
