Table of Contents
Advertisement
W20000-en.book Page 38 Monday, October 22, 2007 3:35 PM
IRIS
Lens Shift
Display menu
FUNCTION
(default setting / value)
Aspect Ratio
(Anamorphic)
Keystone
(0)
Position
(0)
Overscan
Adjustment
(depends on the selected
input source)
PIP
PC & Component
YPbPr Tuning
System Setup menu
FUNCTION
(default setting / value)
Language
(English)
Splash Screen
(BenQ logo)
My Screen
Projector Position
(Floor Front)
Auto Off
(Disable)
Sleep Timer
(Disable)
Background Color
(Blue)
38
Using the projector
See
"Adjusting contrast ratio via IRIS" on page 29
See
"Shifting the projection lens vertically" on page 12
DESCRIPTION
There are several options to set the picture's aspect ratio depending on your input
source. See
"Selecting the aspect ratio" on page 30
Corrects any keystoning of the picture. See
page 23
for details.
Displays the position adjustment page. To move the projected picture, use the
directional arrow keys. The values shown on the lower position of the page
change with every key press you made until they reach their maximum or
minimum.
Conceals the poor picture quality in the four edges. You can also manually press
/
to decide how much to be concealed. Setting 0 means the picture is 100%
displayed. The greater the value, the more portion of the picture is concealed
while the screen remains filled and geometrically accurate.
Turns the PIP window on or off and makes related adjustments. See
more than one image source simultaneously" on page 32
H.Size (0)
Adjusts the horizontal width of the picture.
Phase (0)
Adjusts the clock phase to reduce picture distortion.
Auto
Adjusts the phase, and frequency automatically
DESCRIPTION
Sets the language for the On-Screen Display (OSD) menus. See
on page 20
for details.
Allows you to select which logo screen will display during projector start-up.
Three options are available: BenQ logo screen, Blue screen, or My Screen.
Captures and stores the projected picture as My Screen. See
startup screen" on page 33
for details.
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See
"Obtaining a preferred projected image size" on page 12
Prevents unnecessary projection when no signal is detected for a long time. See
"Setting Auto Off " on page 43
for details.
Sets the auto-shutdown timer. The timer can be set to a value between 30 minutes
and 3 hours.
Allows you to choose the color of the background screen that will be displayed
when there is no input signal detected.
for details.
for details.
for details.
"Correcting picture distortion" on
"Displaying
for details.
"Using the menus"
"Creating your own
for details.
Advertisement
Table of Contents
