New Capabilities In Version 10.2 Software - Xerox Nuvera 100 Hints And Tips Manual

2 New Capabilities in
Version 10.2
Software
The following is a list of new capabilities enabled with version 10.2 software:
1. The Xerox Tape Binder (XTB) is now configurable in Dual Mode (2 XTB's connected
together).
2. Disable status messages when trays are disabled. This de-clutters the status message area
when a tray is disabled.
3. Add a custom edge erase feature that can set the edge erase in the range of 0 mm to 6
mm for each of the four edges.
4. Added the ability to disable/enable a stacker (on DS3500 or BFM). This allows the user to
disable a stacker if they want to restrict jobs from going to that stacker and then re-enable
later.
5. Enable both top trays for purge events on systems with 2 top trays. This will improve
purge effectiveness.
6. Improved jam clearance by adding additional areas that can be purged to the 5B area.
7. Added several new Finisher profiles to the catalog.
Hints and Tips Guide
2
2-1