Installing Drivers And Utilities For Macintosh Os X Version 10.5 And Later - Xerox Phaser 6700V/DX User Manual

Installation and Setup

Installing Drivers and Utilities for Macintosh OS X Version 10.5 and Later

®
Install the Xerox print driver to access all the features of your printer.
To install the print driver software:
Insert the Software and Documentation disc into your computer.
1.
2. Double-click the disc icon on your desktop to see the .dmg file for your printer.
3. Open the .dmg file, and navigate to the appropriate installer file for your operating system.
4. Open the installer file.
5. Click Continue to acknowledge the warning and introductory messages.
Click Continue and accept the license agreement.
6.
7. Click Install to accept the current installation location, or select another location for the installation
files, then click Install.
Enter your password, then click OK.
8.
9. Select your printer in the list of discovered printers, then click Continue.
10. If your printer does not appear in the list of discovered printers:
a. Click the Network Printer Icon.
Type the IP address of your printer, then click Continue.
b.
c. Select your printer in the list of discovered printers, then click Continue.
11. Click OK to accept the print queue message.
12. Select or clear the Set Printer as Default and Print a Test Page check boxes.
13. Click Continue, then click Close.
Note: The printer is automatically added to the printer queue in Macintosh OS X version 10.4
and later.
To verify that the print driver recognizes the installed options:
From the Apple menu, open System Preferences > Print.
1.
2. Select the printer in the list, then click Options and Supplies.
3. Click Driver, then confirm that your printer is selected.
4. Confirm that all of the options installed on the printer appear correct.
5. If you change settings, click Apply Changes, close the window, and quit System Preferences.
28 Phaser 6700 Color Printer
User Guide