Cq#43522 Annotation-2; Cq#44256 Configuration Backup; Cq#44223 Pdf And Html Files Viewed From Cd; Cq#44186 Recognizing Indication Of Successfully Proofed Job - Xerox Nuvera 100 Hints And Tips Manual

Xerox Nuvera

CQ#43522 Annotation-2

Description
When performing a "Copy and Save" or "Print and Save" operation with annotations turned
on, the reprint of the saved job will be unreadable.
Workaround
Perform a "Save" operation and then "Print" the saved job.

CQ#44256 Configuration Backup

Description
When performing a Configuration Backup, make sure you do not exceed the maximum disk
size of the CD. If you do, the backup will fail without an indication as to why.
Workaround
None.

CQ#44223 PDF and HTML Files Viewed from CD

Description
Operator needs to view PDF or HTML files on a CD.
Workaround
Do one of the following:
1. To view PDF files, go to [Launch -> Applications -> Graphics -> PDF Document Viewer]
and open the PDF on the CD.
2. To view HTML files, go to [System -> Remote Services -> Options -> Launch Web
Browser].

CQ#44186 Recognizing Indication of Successfully Proofed Job

Description
When a job is successfully proofed, there appears to be no indication that it has been proofed.
Workaround
Ensure the "Proof/Review Status" column is in the visible portion of the table. This column is
identified by a computer icon in the header. If the column is at the end of the table (left side),
move it to the beginning (right side). A successfully proofed job will have an icon appear in this
column that looks like a green check mark over a document.
Hints and Tips Guide
Release Issues
3-3