Housing For Wall Mounting; Description; Views - Siemens 13-xx-ST-SBT Series Product Data

37 Housing for wall mounting

37.1
37.2
Building Technologies
Fire Safety

Description

The housing for wall mounting of the stations is used for the following stations:
All compact control panels
Fire terminal FT2040
The empty housings are used for extensions, add-ons or for building in options.
Empty housings have the following features:
Delivered as kit, including cover cap and carrier plate
Construction identical to the housings of the different station types
The housings have the same cable breakout openings as the stations
Easy wall mounting
Can be screwed onto the stations of the same construction type from below or
above
Fixation points for cable ties
Built-in DIN rail for mains separation terminals and accessories
You will find an overview of the components or batteries that can be fitted in
document 008836 and in document 008843.

Views

The empty housings consist of the following components:
Rear panel made of sheet metal
Cover cap made from synthetic material
Carrier plate covered with design foil
Housing for wall mounting
Description
008837_q_en_--
14.05.2012
37
209