Lanic Test; Cpu - HP MICRO 3000 Diagnostic Manual

Test Mode Command Descriptions
LANIC Test
The LANIC code is not included in the selftest microcode. The LANIC PCA executes its own
self test.
After the ATP, PIC, and LANIC tests execute, return is to the
"Tes t -
>" prompt.
The correct syntax for this command is:
CH[an][
count[,channel]
The following illustrates the use of CHAN:
CPU
1-NORMAL
Test ->CH
Channel - Terminal Interface Controller
Channel 4 - Peripheral Interface Controller
Test Passed
1-NORMAL
Test -)
The test mode
CPU
command executes the following CPU tests not run at power-on:
• P, D, S, and A bank register tests.
• TOC RAM loea tion test.
• TOC counting verification.
• MPE timer counting verification.
• Watchdog Timer Force Condition verification and FMD capability test.
Te,sts not performed by this CPU test, but executed by the power-on CPU test are:
• ROM checksum test.
• Full processor chip function test.
• Full WCS address and data test.
• Register file address and data test.