~Er_R_O_R_C_O_D_E_S; A Tp Test Error Codes; Atp Test Section 1; A-I - HP MICRO 3000 Diagnostic Manual

~ER_R_O_R_C_O_D_E_S
______________
~lrH!H,
Appendix A includes aU error codes associa ted wiih
i
he -MiCRO 3000 seJftest. The errOi codes are listed
according to the test sequence they are associated with: ATP, PIC, LANle. CPU, ur MEMOR Y.
A TP TEST ERROR CODES
The ATP error codes are divided according to one of the nine sections of the ATP test that detected the
error.
The slot test will display (lne of the following error codes if the ATP test fads. The tests are run in the
same sequence as the test sections. Testing stops when the first failure is detected.
ATP Test Section 1
This section is the initializ.ation test which initiahl.es the ATP and verifies registers l:ontain expected data.
Code Error
0108 Register 8 initialization error (expected $0800)
0109 Register 9 initializ.ation error (expeded $08(0)
010A Register A initializ.ation error (expected $FFOU)
010C
Register C initializa tion error (expected $0000)
0100 Register D initialization error (expected $0000)
010E Register
E
initializa tion error (expected $ 5004)
010F Register F initialization error (expected $ 5004)
ATP Test Section 2
This section tests basic operations, and OBII, IPOLL, SMSK and RMSK.
Code Error
0201 SMSK/RMSK test; ATP did not respond with mask bit set.
0202 SMSK/RMSK test; ATP did not respond with mask bit clear.
0203 A TP did not set IRQ.
0204 Improper IPOLL response (none, wrong, or mUltiple channels).
0205 Improper OBU response.
DEC 86
A-I