Table of Contents
Advertisement
Test Mode Command Descriptions
PON
The test mode
PON
command executes the power-on self test count times. This command is like the
ALL
test mode command except the power-on CPU test is executed in place of the manually executed CPU
test, and IOMAP is not executed. The PON test is initiated by toggling the PON hne.
NOTE
This command cannot be run from keyswitch poslhon "3" (REMOTE) or
from keyswitch position "2" (LOCAL) directly from position "3" (REMOTE).
The correct syntax for this command is:
PON
[count]
The following illustrates the use of
PON:
2-LOCAL (from Normal)
Self Test ->PON
Power on Self Test
Memory Test passed
Memory Size (MEGABYTES)
=
nn
Channel
1 - Terminal Interface Controller
Channel
4
Peripheral Interface Controller
2-LOCAL (from Normal)
Self Test ->
DEC 86
A._!Z
Advertisement
Table of Contents
