Table of Contents
Advertisement
Utilizing FAQ function
The INFORMATION menu contains possible solutions to problems encountered by users
regarding image quality, installation, special feature operation and service information.
To get the FAQ information:
1.
Press
or press MENU/EXIT to open the OSD menu
and press
INFORMATION menu.
2.
Press
FAQ-Features and Service based on the
information you want to know.
3.
Press Mode/enter on the projector or ENTER on
the remote control.
4.
Press
Mode/enter on the projector or ENTER on the
remote control for possible solutions.
To exit the OSD menu, press MENU/EXIT.
Locking control keys
With the control keys on the projector locked, you can prevent your projector settings from
being changed accidentally (by children, for example). When the Panel Key Lock is on, no
control keys on the projector will operate except Power and LASER.
1.
Press
go to the SYSTEM SETUP: Basic > Panel Key Lock
menu, and select On by pressing
projector or remote control. A confirmation
message displays.
2.
Highlight Yes and press Mode/enter on the
projector or ENTER on the remote control to
confirm.
To release panel key lock, press and hold
remote control or projector for 3 seconds.
You can also use the remote control to enter the
SYSTEM SETUP: Basic >
press
/
•
Buttons on the remote control are still in use when
panel key lock is enabled.
•
If you press Power to turn off the projector without
disabling panel key lock, the projector will still be in
locked status the next time it is turned on.
42
Operation
/
on the projector or remote control
/
to highlight the
to select FAQ-Image and Installation or
/
to select the a problem and press
/
on the projector or remote control or
Panel Key Lock menu and
Off
to select
.
/
on the
/
on the
Advertisement
Table of Contents
