Picture Menu - BenQ MP723 User Manual

PICTURE menu

Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
Picture Mode
(PC/DVI-A/DVI-
D: Dynamic;
YPbPr/ S-Video/
Video:
Standard)
Reference
Mode
Brightness
Contrast
Color
(0)
Tint
(0)
Sharpness
(15)
Brilliant
Color
(On)
Color
Temperature
(T3)
3D Color
Management
Save
Settings
DESCRIPTION
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
mode" on page 35 for details.
Selects an picture mode that most suits your need for the image quality
and further fine-tune the image based on the selections listed on the same
page below. See "Setting the User 1/User 2 mode" on page 36
Adjusts the brightness of the image. See
for details.
Adjusts the degree of difference between dark and light in the image. See
"Adjusting Contrast" on page 36
Adjusts the color saturation level -- the amount of each color in a video
image. See "Adjusting Color" on page 37
Adjusts the red and green color tones of the image. See
on page 37 for details.
Adjusts the image to make it look sharper or softer. See
Sharpness" on page 37
See "Adjusting Brilliant Color" on page 37
There are four color temperature settings are available. See
color temperature" on page 37
See "3D Color Management" on page 38
Saves the settings made for User 1 or User 2 mode.
"Adjusting Brightness" on page 36
for details.
for details.
for details.
for details.
for details.
for details.
"Selecting a picture
for details.
"Adjusting Tint"
"Adjusting
"Selecting a
Operation 49