Utilizing Faq Function; Locking Control Keys - BenQ MW870UST User Manual

Utilizing FAQ function

The INFORMATION menu contains possible solutions to problems encountered by
users regarding image quality, installation, special feature operation and service
information.
To get the FAQ information:
1. Press
MENU/EXIT to open the OSD menu and
press
INFORMATION menu.
2. Press
Installation or FAQ-Features and Service
based on the information you want to know.
3. Press MODE/ENTER.
4. Press
5. Press MENU/EXIT to exit the OSD.

Locking control keys

With the control keys on the projector locked, you can prevent your projector settings
from being changed accidentally (by children, for example). When the Panel Key Lock is
on, no control keys on the projector will operate except Power.
1. Press
control or go to the
Basic
> Panel Key Lock menu, and select
On by pressing
remote control.
2. A confirmation message displays. Select Yes to
confirm.
To release panel key lock, press and hold
3 seconds on the projector or remote control.
You can also use the remote control to enter the
Key Lock and press
• Keys on the remote control are still in use when panel key lock is enabled.
• If you press Power to turn off the projector without disabling panel key lock, the projector
will still be in locked status the next time it is turned on.
on the remote control or press
/ to highlight the
to highlight FAQ-Image and
/ to select a problem and press MODE/ENTER for possible solutions.
/ on the projector or remote
SYSTEM SETUP:
/ on the projector or
/ to select Off.
/ for
SYSTEM SETUP: Basic
> Panel
Operation
43