Freezing The Image; Hiding The Image; Utilizing Faq Function - BenQ MP776 User Manual

Freezing the image

Freezing the image Freezing the image Freezing the image
Press FREEZE FREEZE on the remote control to freeze the
FREEZE FREEZE
image. The word "FREEZE
left corner of the screen. To release the function, press
any key on the projector or remote control.
Even if an image is frozen on the screen, the pictures
are running on the video or other device. If the
connected devices have active audio output, you will
still hear the audio even though the image is frozen
onscreen.

Hiding the image

Hiding the image Hiding the image Hiding the image
In order to draw the audience's full attention to the
presenter, you can use BLANK
remote control to hide the screen image. The word
"BLANK BLANK BLANK" appears in the corner of the screen while the BLANK
image is hidden. When this function is activated with an
audio input connected, the audio can still be heard.
You can set the blank time in the
Basic > > > > Blank Timer Basic Blank Timer
Basic Basic Blank Timer Blank Timer
the image automatically after a period of time when
there is no action taken on the blank screen. The length
of time can be set from 5 to 30 minutes in 5-minute
increments.
If the preset time spans are not suitable for your
personation, select Disable
Blank Timer Blank Timer Blank Timer Blank Timer
No matter
most of the keys on the projector or remote control to
restore the picture.

Utilizing FAQ function

Utilizing FAQ function Utilizing FAQ function Utilizing FAQ function
The INFORMATION INFORMATION menu contains possible solutions to problems regarding image
INFORMATION INFORMATION
quality, installation, special feature operation and service information.
To get the FAQ information:
1. Press /
or press MENU/EXIT MENU/EXIT to open the OSD menu
MENU/EXIT MENU/EXIT
and press
INFORMATION menu. INFORMATION
INFORMATION INFORMATION
2. Press to select FAQ-Image and Installation
FAQ-Features and Service FAQ-Features and Service. FAQ-Features and Service FAQ-Features and Service
3. Press MODE/ENTER MODE/ENTER. MODE/ENTER MODE/ENTER
4. Press /
MODE/ENTER MODE/ENTER for possible solutions. MODE/ENTER MODE/ENTER
5. To exit the OSD menu, press MENU/EXIT
FREEZE" will display in the upper
FREEZE FREEZE
BLANK on the projector or BLANK BLANK
SYSTEM SETUP: SYSTEM SETUP:
SYSTEM SETUP: SYSTEM SETUP:
menu to let the projector return
Disable.
Disable Disable
is activated or not, you can press
on the projector or remote control
/ to highlight the
FAQ-Image and Installation or
FAQ-Image and Installation FAQ-Image and Installation
to select a problem and press
MENU/EXIT.
MENU/EXIT MENU/EXIT
http://www.pureglare.com.au
Do not block the projection
lens from projecting as this
could cause the blocking
object to become heated and
deformed or even cause a fire.
Operation 37