Air Purifying Operation; S-Plasma Ion Function - Samsung MWR-WE13N User Manual

Air Purifying Operation

The air purification function of the Samsung air conditioner keeps the air in an enclosed space purified.
16 English

S-Plasma Ion function

Use the S-Plasma Ion function to purify your room with negative ions
produced by the air conditioner. This function is available in the Auto,
Cool, Dry, Fan, and Heat modes.
In the Auto, Cool, Dry, Fan,
or Heat mode
NOTE
For a purification panel, dust collection is operated.
To cancel the S-Plasma Ion function, press the
When the S-Plasma Ion function is additionally selected in the Fan
mode, you cannot change the set temperature.
When the S-Plasma Ion function is additionally selected while a
specific mode is running, there is little difference in electricity
consumption and operating noise.
When the indoor unit is turned off, or the S-Plasma Ion function is
not supported,
button.
For the ventilator (ERV), the button does not work. However,
the indicator is displayed on the remote controller display when
S-Plasma Ion is installed in the ventilator (ERV).
Air purity level indications
The indications are displayed only on the models that support the air
purity level display function.
The air purity is indicated in the following 4 levels (specified by
Samsung):
Good
Air purity level may not be displayed depending on the indoor unit's
specification.
indicator is displayed when you press the
Normal Bad
button again.
Very bad