Samsung MWR-WE13N User Manual page 10

Remote Controller Overview
Classification Button
Common
function
related
information
Ventilator
(ERV) related
buttons
NOTE
Some functions may not be available, depending on the indoor unit specifications.
After cleaning the filter, please press the
turned on again upon the next cleaning period.
If you press a functional button not supported by the indoor unit, then the
on.
If the temperature display setting is set to indoor temperature and you press the
indicator appears. (When you install the wired remote controller, the setting is available.)
If you press the
conditioner and the Ventilator(ERV) might operate or stop at the same time or only the air conditioner
might operate or stop.
The factory setting is set to simultaneous operation/stop. (When you install the wired remote controller,
the setting is available.)
Although the air conditioner and the Ventilator (ERV) are set to simultaneous operation/stop, you can
individually control the air conditioner and the Ventilator (ERV) by using another controller (e.g. wireless
remote controller, central controller) except for a wired remote controller.
English
10
S-Plasma Ion button
Long button
Operation On/Off button
Mode button
Fan Speed button
E.Saver button
Clean up button
when your Ventilator(ERV) is connected to a wired remote controller, then the air
Function
Selects S-Plasma Ion function
Selects Long reach function
Turns the Ventilator(ERV) On/Off
Selects the desired operation for the Ventilator (ERV)
Changes the fan speed for your Ventilator (ERV)
Starts Energy-Saving Operation
Selects air purification through the in/out load controls
button. The indicator will turn off, and it will be
indicator will turn
button, the